Tag Archives: RN2483

LoRa breakout board for RN2483 and Arduino Pro Mini 3.3V

Aim of this project is to create a node which implement LoRa sensors and actuators .

Using an Arduino Pro Mini 3.3V in this way I solve  the problem to use voltage regulators for RN2483 .

Simply load the sketch on Arduino Mini Pro and the  device is ready to send and receive information through a LoRa Network .

Arduino Mini Pro 3.3v

This is the image of the PCB


and this with components …


The RN2483 will be welded on the copper side of the PCB , with the remainder on the component side .

I have not use a 2 sided PCB, I have made some jumpers to connect 3.3V and GND .



LORA Network – Microchip RN2483

And finally came the first chip certified by Lora Allianz , the RN2483 Microchip .

We are now working to create breakout or shield for Arduino to begin transmission tests .

Now first of all interested in understanding the transmission range of the city of Brescia .

We publish a first version of the breakout that will use for testing. It ‘s still an Alpha version … to be verified and tested … lora_breakout

So we are ready … in the coming days more news on LORA Network and LORAwan …